INDICATOR: 1 HEAVY RUMBLE (+ GREEN LIGHTBAR FLASH ON PS4)
SECONDARY PROFILE
SECONDARY WEAPON
SELECTOR: WHILE HOLDING TOUCHPAD / VIEW, HOLD OR
(until you feel a rumble)
INDICATOR: 2 HEAVY RUMBLES (+ RED LIGHTBAR FLASH ON PS4)
DISABLE PROFILE
SELECTOR: WHILE HOLDING TOUCHPAD / VIEW, HOLD OR
(until you feel a rumble)
INDICATOR: 1 LIGHT RUMBLE (+ PURPLE LIGHTBAR FLASH ON PS4)
MOD CENTRAL SETUP:
CLASS 1,2 represent your Primary and Secondary Weapon Fire MODS. Please see the Weapon Fire section for more information.
IMPORTANT NOTES:
BOTH PROFILES have their own ADS Anti-Recoil Strength settings for your Primary and Secondary Weapons. We recommend using the ADS Anti-Recoil Quick Edit during gameplay.
ADS ANTI-RECOIL ADJUSTMENTS USING QUICK EDIT:
SELECT THE WEAPON & PROFILE THAT YOU WISH TO ADJUST...
IT IS RECOMMENDED THAT YOU FACE A WALL, SO THAT YOU CAN SEE YOUR BULLET HOLE PATTERN...
WHILE AIMING DOWN SIGHTS & FIRING, TAP or any D-Pad direction to enter Quick Edit Mode. At this point, you MUST remain Aiming Down Sights while making adjustments but you can stop firing to save ammunition.
Optionally, you can easily setup your starting value by using your Aim Analog Stick. WHILE FIRING begin STEADILY AIMING in the OPPOSITE DIRECTION that the recoil is moving. Once you RELEASE FIRE, a base Anti-Recoil value will be saved and you can use the following method to fine tune it until there is virtually no recoil:
BEGIN TAPPING to reduce the vertical recoil of your weapon and test fire as you need to. If your weapon starts pointing downwards, TAP instead until your weapon remains level. If your weapon is consistently pulling to one side, TAP OR to pull it the other way. When you are happy with the result while firing, stop Aiming Down Sights to save the setting and exit Quick Edit Mode.
You can read back the saved Anti-Recoil value in the MOD Central Game Pack Configuration later if you wish to take note of it. Remember that the ideal Anti-Recoil value is different for every weapon.
To reset the Anti-Recoil setting to 0, WHILE AIMING DOWN SIGHTS & HOLDING , PRESS R3 / RS.
or any D-Pad direction to enter Quick Edit Mode. At this point, you 
instead until your weapon remains level. If your weapon is consistently pulling to one side, TAP 
OR 
to pull it the other way. When you are happy with the result while firing, stop Aiming Down Sights to save the setting and exit Quick Edit Mode.