TAPPING a PADDLE / ACTION BUTTON instantly navigates to the CLASS for that PADDLE / ACTION BUTTON.
GREEN LIGHTBAR (PS4) / WHITE LED (XB1) flashes indicate the currently selected CLASS number.
or navigates UP a MOD within the currently selected CLASS.
or navigates DOWN a MOD within the currently selected CLASS.
This will change your currently ENABLED MOD!
PURPLE LIGHTBAR (PS4) / GREEN LED (XB1) flashes indicate the currently ENABLED MOD number.
You MUST be selected on the correct MOD to adjust it.
A single adjustable may be (Shared) by several MODS.
MENU MODE STRUCTURE
CLASS
MOD
Number of Green (PS4) / White (XB1) flashes
Number of Purple (PS4) / Green (XB1) flashes
1. Primary Weapon
2. Secondary Weapon
0: Rapid Fire AI
1: Rapid Fire
2: Cover Fire AI
3: Quick Scope
4: Disabled
3. ADS MOD
1: Crouch Aim
You MUST be in Menu Mode, selected on Class 5 to make adjustments!
Aim Assist -
HOLD L2 to test the Aim Assist MOD...
Aim Assist Intensity:
L1 / LB Decrease | R1 / RB Increase
Number of Red flashes (PS4) / RT rumbles (XB1) | 1-50 (0 is OFF).
15 is fine for most players. If the camera shaking seems excessive or nonexistent, lower or raise the value accordingly until it is subtle but visible.
Aim Assist Drift Correction:
PRESS R3 / RS to toggle Drift Correction...
(Heavy Rumble: ON / Light Rumble: OFF)
When Drift Correction is ON:
To adjust Drift Correction Degree, move the aim analog stick against the direction that it is drifting (for example if it is drifting to the upper left, move the stick to the lower right).
Drift Correction Strength is based on how far the stick is moved from its resting position; the further you move the stick out, the stronger the correction.
While Drift Correction is toggled ON, Drift Correction Strength can also be adjusted, albeit less precisely with the bumpers -
L1 / LB Decrease | R1 / RB Increase
Number of Red flashes (PS4) / RT rumbles (XB1) | 1-30 (0 is OFF)
If you need to reset the Drift Correction, HOLD R3 / RS until you feel 2 Heavy Rumbles.
2: Rapid Crouch Aim
4: Aim Assist & Crouch Aim
5: Aim Assist & Rapid Crouch Aim
6: Quick Scope
7: Ping on ADS
4. FIRE MOD
1: Drop Shot
2: Rapid Crouch Fire
3: Hop Shot
4: Strafe Fire
5: Circle Strafe Fire
6: Ping on Fire
7: ADS Ping on Fire
5. Aim Assist
1: Aim Assist Always Active
You MUST be in Menu Mode, selected on Class 5 to make adjustments!
Aim Assist -
HOLD L2 to test the Aim Assist MOD...
Aim Assist Intensity:
L1 / LB Decrease | R1 / RB Increase
Number of Red flashes (PS4) / RT rumbles (XB1) | 1-50 (0 is OFF).
15 is fine for most players. If the camera shaking seems excessive or nonexistent, lower or raise the value accordingly until it is subtle but visible.
Aim Assist Drift Correction:
PRESS R3 / RS to toggle Drift Correction...
(Heavy Rumble: ON / Light Rumble: OFF)
When Drift Correction is ON:
To adjust Drift Correction Degree, move the aim analog stick against the direction that it is drifting (for example if it is drifting to the upper left, move the stick to the lower right).
Drift Correction Strength is based on how far the stick is moved from its resting position; the further you move the stick out, the stronger the correction.
While Drift Correction is toggled ON, Drift Correction Strength can also be adjusted, albeit less precisely with the bumpers -
L1 / LB Decrease | R1 / RB Increase
Number of Red flashes (PS4) / RT rumbles (XB1) | 1-30 (0 is OFF)
If you need to reset the Drift Correction, HOLD R3 / RS until you feel 2 Heavy Rumbles.
2: Aim Assist on ADS
3: Aim Assist on Fire
6. Left Paddle / AB #1
7. Right Paddle / AB #2
8. Action Button #3
9. Action Button #4
1: Rapid Fire
You MUST be in Menu Mode, selected on Class 6, 7, 8 or 9 on MOD 13 to make adjustments!
for at least 5 seconds.
navigates UP a CLASS.
